ELITAONE MTB Carbon Seat Post 27.2/30.9/31.6mm Offset 20mm Road Bike Seatpost with Carbon Fiber Base Cover

Lightweight Construction

Its lightweight design ensures minimal weight addition to your bike, improving overall performance.

High-Quality Material

Crafted from premium carbon fibre, this ELITAONE MTB seat post offers superior strength and durability.

Versatile Size Options

Available in 27.2/30.9/31.6mm diameters and lengths ranging from 250-400mm, it caters to various bike models.

Chemical-Free

Produced without high-concerned chemicals, this seat post is safe for use and the environment.

Carbon fiber clamp design

Carbon fiber base cover provides conformity to carbon fiber rail saddle; Enhanced protection of carbon rail

Clamp diameter：Ø 27.2-30.9-31.6mm

Setback：20 mm

Clamp diameter：Ø 7 mm or 7x9 mm oval(carbon

half-shells for

both included)

Lenghts：350 mm or 400 mm

Minimum Insert：100 mm

Material：Carbon

Finish: Matte

Screws: Stainless

steel

Seatpost maximum

locking torque：5.5nm

Saddle clamp

tightening torque: 5.5NM

Max. Permissible

Weight: 120 kg (265 lb)

The clamping design secures the seat cushion with a carbon fiber base and carbon fiber cover to protect the saddle rail and reduce weight.

Compatible with 7mm Round Alloy Rails and 8x8.5mm/7x9mm/7x10mm carbon fiber rails

Installation Instructions

1.Seat Tube Tightening Torque
For metal bicycle frames, tighten to 4Nm
For carbon fiber frames, tighten to 4.5Nm
Maximum locking torque: 5.5Nm
2. Saddle clamp tightening torque
Recommended tightening to 4-5.5Nm
3.Installation Warnings
Ensure that the clamp opening is offset from the frame opening during installation to avoid concentrated stress that may cause the seat post to crack.
(NOTICE:For openings at both front and rear, the seat post clamp should be offset to the side.)
Suggestion: Insert the seat post into the frame 10 cm.