22.5W Power Bank Bidirectional Fast Charging Mobile Power Module Circuit Board With Digital/Light Type-C USB Suppor PD/QC3.0 2.0
Shipping: cost shown at AliExpress checkout · est. 5–10 days
Checkout and payment are handled securely by AliExpress. Sold & shipped by an AliExpress seller; AliExpress handles payment, delivery, returns and refunds. We may earn a commission.
Specifications
- High-concerned chemical
- none
- Type
- Drive IC
- Brand Name
- Ah robot
- Origin
- Mainland China
- Condition
- New
Description
Features:1. Use of high-quality materials, product quality is guaranteed2. Small volume, high power, high efficiency, complete protocols, mainstream open protocols are basically supported3.Module for 3.7V lithium batteries, including polymer, 18650, 21700 lithium batteries; to ensure that the battery is not aging, the battery can be connected in parallel can not be connected in series4. Module volume is relatively small, the heat dissipation area is limited, high-power output heat is a normal phenomenon5. Wide range of product applications, suitable for a variety of industrial DIY occasions
Parameter:full protocol, the mainstream open protocol basically support the charging current up to 5A, efficiency up to 96% output power up to 22.5W, efficiency up to 95%.Automatic load detection / light load detectionHigh-current USB output interfaceSupport small current modeSupport digital tube display and LED power indicatorOutput overcurrent/short circuit protectionCharge timeout/over-voltage protectionSupport PPS/PD3.0/PD2.0Support QC4+/QC4/QC3.0/QC2.0Support FCP, SCP (5V4.5A or 4.5V/5A)Support FCP, SCP, HSCPSupport SFCP to charge batterySupport PD3.0/PD2.0, AFCFCP, SCP , PE1.1
Precautions for use:1. Battery and motherboard cable can not be too thin, try to be thicker. Fast charging board requirements can pass 10A current non-fast charging board should also be able to pass 7A current. Can not be too long, the interface needs to be welded.2. Batteries can only be connected in parallel (parallel number is not limited), not in series, series must burn the motherboard.3. Normal application, the battery must be welded, (wire twisting will be insufficient power supply), the battery reverse motherboard must burn. Never pay attention. Line as thick and short.4. Access to the battery to determine access to the 3.7V battery, not other batteries. Ensure that the battery is not connected in series, otherwise the battery terminal access voltage higher than 4.5V may burn the board.
Package include:Mini fast charging module *1
