Universal Brake Fluid Tester Accurate Oil Quality Diagnostic Tools LED Indicator Liquid Testing Pen Automotive Brake Oil tester
Shipping: cost shown at AliExpress checkout · est. 5–11 days
Checkout and payment are handled securely by AliExpress. Sold & shipped by an AliExpress seller; AliExpress handles payment, delivery, returns and refunds. We may earn a commission.
Specifications
- High-concerned chemical
- none
- Origin
- Mainland China
Description
Specification:
Brand new
Type: Brake Fluid Tester
Material: Plastic
Main function: Check the car brake oil quality
Features:
Quick and easy way to test for moisture content in the brake fluid; results appear in seconds;
Sturdy design: the tester has been greatly improved.
Widely use: Testing dot3, dot4, dot5 brake fluid.
LED Indicator Display:
The green LED lights = water content in the brake fluid H2O <1.5%, brake fluid qualified.
The yellow LED lights = brake fluid water content H2O = 1.5% to 3%, can continue to use, test again six months later。
The red LED lights = water content in the brake fluid H2O> 3%, can not continue to use the brake fluid needs to be replaced
Red LED: change brake fluid
LED red flashing: replacement
LED yellow: low moisture content, check again in six months
LED green: brake fluid lines / cell row
Technical parameters:
Green: OK, that is, brake fluid does not contain water
Green / yellow: brake oil in water content of less than 1%, better brake fluid performance, ease of use.
Green / yellow / yellow: brake oil in water content of about 2%, brake fluid can continue to use.
Green / yellow / yellow / red: brake oil in water content of about 3%, the proposed replacement of brake fluid.
Green / yellow / yellow / red / red: brake oil in water content of at least 4%, the brake fluid must be replaced immediately responsible for very dangerous.
How to use:
Step 1. Turn on the brake fluid tester by pressing the button. A green light should light up. If the light does not come on, it may be time to change a battery.
Step 2. Unscrew the lid for the brake fluid reservoir, and take off the cap for the brake fluid tester.
Step 3. Dip the test probes into the brake fluid and the LED lights will indicate the percentage of water in the brake fluid.
Step 4. After testing, remember to screw the lid of the brake fluid reservoir back on tightly.
Step 5. The tester will automatically power off after 12 seconds of inactivity.
Package Included: 1 * Brake Fluid Tester(Not Battery Included)
