TIMEMORE Basic 3 Black Mirror Pour Over Coffee Scale Espresso Scale,Flow Rate, Auto Timer,Ratio, 3 Brewing Modes, 2kg Capacity

Reading Drifting?

Check These 2 Things First

🛑Most unstable readings are caused by the surface under the scale or by moving air.

Two incorrect setups to avoid

‼️ The following two common setup mistakes can make the displayed weight rise or fall even when nobody is touching the brewer.

1. A fabric mat is under the scale

🙅Incorrect setup: placing the scale on a woven mat, coffee mat, coaster, towel, or other fabric surface. Even when the countertop underneath is hard, the soft layer can compress, shift, or let the scale rock slightly.

🙅Do not place the scale on: a table mat, coffee mat, cup coaster, towel, carpet, rubbery fabric, or any other soft or flexible material.

✅ Correct setup: Remove every mat or coaster and place all four feet of the scale directly on a hard, flat marble countertop, a flat and wobble-free wooden table, or a stable workbench.

✅All four feet must be fully supported: Position the entire scale away from the countertop edge so that all four feet rest completely on the same solid surface. No foot should hang over the edge or remain unsupported. Check that the scale does not tilt or rock.

✅Silicone-pad note: The supplied silicone pad belongs on top of the weighing platform to protect it from heat. It is not a cushion for underneath the scale.

2. Air from a fan or air conditioner is reaching the scale

‼️Warning sign: the filter paper sways or trembles even though nobody is touching it. Any visible movement can indicate airflow from a fan, air conditioner, vent, or open window.

‼️Moving air presses on the large filter paper and brewer. A sensitive coffee scale detects this changing force, so the reading drifts up and down.

✅Correct setup: Turn off or redirect nearby fans and air conditioning, move away from vents, and close any window creating a draft. If the filter paper is still moving, airflow interference is still present. Move the scale to another area without airflow interference before use.

FAQ - Why Is My Scale Reading Unstable?

🤔Q1: Can I put the scale on a coffee mat, cup mat, towel, or carpet?

✅A: No. Even if the table underneath is hard, a soft or flexible layer can compress and cause tiny rocking or uneven support. Place the scale itself directly on a hard, flat, stable surface.

🤔Q2: The filter paper is moving slightly. Can that affect the weight?

✅A: Yes. Moving filter paper is an easy visual warning that air is reaching the setup. Turn off or redirect the fan/AC, move away from the vent, and retest only when the paper is completely still.

🤔Q3: Can I use the scale near the edge of a hard, flat countertop?

✅A: Only if all four feet are completely supported. A hard, flat countertop is not sufficient when one foot hangs over the edge or remains unsupported. Place the entire scale inside the countertop area and check that it cannot tilt or rock.

🤔Q4: What other vibrations can make the number move?

✅A: Touching the table, footsteps, closing a door, a running grinder, refrigerator, pump, or other appliance can transmit vibration. Test on a stable counter without touching it and move the scale away from operating equipment.

🤔Q5: Can static electricity or nearby electronics cause unstable readings?

✅A: They can in some environments. Keep wireless chargers and transmitting devices away during the test. Avoid rubbing dry plastic, synthetic cloth, or clothing near the scale, as these can build static charge.

🤔Q6: Is the scale fully charged before shipping?

✅A: No. The scale is not fully charged at the factory. Please fully charge it before first use.

🤔Q7: What charging cable and charger should I use?

✅A: The package includes a USB-C charging cable but does not include a charger. Use your own 5V/1A charger. Do not use a fast charger. Fast charging will not make the scale charge faster; it only creates extra heat and may damage the battery.

🤔Q8: Should I recharge the scale during long periods of non-use?

✅A: Yes. Recharge the scale periodically even when it is not used for a long time. This helps keep the battery active and supports long-term battery health.

🤔Q9: Should I use the heat-insulation pad under a hot glass server?

✅A: Yes, always. Place the heat-insulation pad on top of the scale before setting down a hot glass server. Long-term direct contact with heat can accelerate aging of the weighing-surface material and may damage the scale's internal precision components.

🤔Q10: Why is the display stuck on "8888" after I turn on the scale?

✅A: "8888" is the startup self-test display. Do not touch, press, or hold any button on the screen until the self-test is complete. Holding a capacitive button during startup can prevent the scale from completing its self-test. An unstable, tilted, uneven, or wobbling surface can cause the same problem.

Restart steps: Turn the scale completely off. Move it to a hard, flat, level, stable surface, with all four feet fully supported and no rocking. Turn it on again, then keep your hands away from the scale and all buttons until the normal weighing display appears.

👍Place the scale on a flat and stable surface.

🥰Keep away from airflow interference

Important Notice

Due to material differences, the digital display on the white scale is less clear than the black version. We recommend choosing black if display visibility is a priority.

Thank you for your understanding.

How to Choose Between Basic 2 & Basic 3 Coffee Scales

Choosing the right coffee scale depends on your brewing habits, budget, and feature needs—here’s a clear breakdown to help you decide:

Pick Basic 2 if you:

Are a beginner home barista or casual coffee drinker

Only brew pour-over coffee (no espresso brewing required)

Have budget constraints and want a cost-effective core option

Only need essential features: pour-over mode + flow rate display (no espresso mode or coffee-to-water ratio function)

Don’t require ultra-precise measurements (0.5g minimum weighing meets basic needs)